Install the Yuyuan YR-20 water dispenser by first gathering tools like wrenches and Teflon tape, unpacking the box to remove the front filter cartridge, peeling off its protective film, and securing the connection joints between the filter bottle and the main unit.
沁园YR-20饮水机使用说明书在哪里看
Connect the purification pipe to the ball valve and secure it with the tightening nut, then sleeve the pipe with the white inner sleeve and insert the plug into the closed end. Finally, flush the system several times according to the manual before use, and remember to close the ball valve if leaving home for more than 24 hours.
Locate the cold water source under the kitchen sink, shut off the angle valve, and tighten the water inlet tee joint onto it. Use a drill to make a 10mm hole in the sink edge, smooth it with a file, and firmly install the water purification faucet ensuring it is stable and secure.